|
| |
Part Number: ETI0001-1240
Rugged Mil Spec® Rack or Fixed Mount
1000 VA UPS and Frequency Converter
Used in Medical Applications
US Air Force ECMO Medical Patient Cart
Application
1.0 kVA Mil Spec UPS and Frequency Converter
Rugged Rack or Fixed Mount Unit
w/ Reduced Depth and Multiple Battery Modules for
Up to 4 Hours of Battery Backup between Locations
Accepts both Aircraft Power and Commercial Power
ETI0001-1240 Rugged Mil Spec UPS Standard Front Panel Layout,
Shown w/ Rack Flanges Mounted and One
Battery Expansion Module
ETI0001-1240 Rugged Mil Spec UPS Standard Rear Panel Layout,
Shown w/ One Battery Expansion
Module, w/o Rack Flanges When
Mounted in Lower Section of the Patient
Cart
The field proven Airborne Power® UPS line is ideally suited for military,
industrial, medical and telecommunications applications requiring high reliability, rugged
construction, compact size and light weight design. These units are equally
suited for use in shipboard, airborne, vehicular, field deployed or fixed
locations with controlled or uncontrolled environments. The
"ETI0001-1240" is being used by the US Air Force ECMO Cart project because
of their stringent performance and reliability requirements.
The heavy-duty chassis,
occupying only 3U (5.25" high) of rack space and 18.5" depth, has rounded metal corners
and rugged handles front and rear, aiding in safe handling. The companion 2U
(3.5" high) Battery Expansion Modules are designed to be daisy chained to bring the backup
time to 4 hours in the typical configuration. In the typical ECMO Cart
application, the base UPS unit and up to four Battery Modules are mounted in the
lower underside section of the patient cart. Both module chassis are
constructed of brushed aluminum to minimize overall weight. Internally, all major
components are well secured and electrically insulated to prevent damage due to shock and
vibration.
The internal shielded
input transformer provides galvanic isolation with provisions for domestic (115
VAC, CONUS) and optionally for international (230 VAC, OCONUS) input
voltages. Special EMI/RFI filters and input
power factor correction minimize both input current and harmonics. This special
transformer and filters result in ultra low input leakage current required for
medical applications. The unit also operates
as a frequency converter, taking 46-440 hertz input and converting it to clean,
uninterruptible 60 hertz power. The input switch and the galvanic isolation
transformer all provide a double pole isolated source for
systems or locations where phase references and grounding are not
consistent. For scenarios that need hospital grade power immediately and
no AC source is available to run the UPS, the Cold Start pushbutton allows the unit to
start and run from its
battery modules before external AC is available.
The LED arrays keep the
operator informed as to the unit's status including load and battery levels. The
high intensity audible alarm can be heard in high noise environments. All controls
and protective devices are brought to the front and rear panels with critical switches having finger
guards. Further, all front panel devices are recessed to prevent damage or accidental
operation. Various
optional power distribution controls are available which mount on the front panel or
remotely.
The rear panel provides a locking
connector for the input power and six hospital grade NEMA 5-15R output receptacles.
Multiple
input and output power panel options are available. Removable and washable air filters and a high capacity
stainless steel ball bearing fans provide
added protection in both controlled and hostile environments. The exhaust air is diverted out the front
vent, with alternate
air flow directions optional. The "ETI0001-1240" has the added benefit of having
both an internal battery and external battery expansion modules. The external
Battery Modules can be field replaced without having to shut the UPS down. This
allows the backup time to be extended even further. The optional Battery
Charger/Conditioner (which has aircraft and global input capability) is used
to maintain the spare Battery Modules in ready condition at all times. The batteries are maintenance free with immobilized electrolyte and are
constructed of flame retardant materials. For more information, see the         
Send questions or comments about this web site to
sales@ruggedsystems.com.
Copyright © 1991-2011
Energy Technologies, Inc.
All Rights Reserved. Last modified:
October 07, 2011
1st Energy™,
1st
Power™,
911 Power™,
ACanytime™,
ACanywhere™,
ACbackup™,
Airborne UPS™,
Air Force Backup™,
Air Force UPS™,
Army UPS™,
Backup AC™,
Backup Source™,
Backup The Web™,
Battle Power™,
Blackout Prevention™,
Business Back UPS™,
clean UPS™,
Coast Guard Power™,
Coast Guard UPS™,
Controlling Power™,
DC backup™,
Disaster Recovery Gear™,
Eco Power Source™,
eDocsPort™,
Energy Tech™,
ETI™,
Extreme Power Source™,
Global Power Source™,
Global UPS™,
Homeland Security 24-7™,
Humanitarian Power™,
Hybrid Energy Storage™,
Improved Power™,
Industrial Backup™,
Intelligent
PDU™,
Intelligent
UPS™,
Internet Power Manager™,
Lab Power™,
Lab UPS™,
Light UPS™,
Know Power™,
Marine Corp Power™,
Marine UPS™,
Medical AC™,
Medical Backup™,
Military Backup™,
Navy Power™,
Navy UPS™,
Network Power Manager™,
Office UPS™,
open UPS™,
Personal Power Source™,Petro
Chem Power™,
Pipeline Power™,
Portable Power Plant™,
Powering The Net™,
Power Protection™,
Power Security™,
Preventing Blackouts™,
Railroad Power™,
Redundant Power™,
Renewable Source™,
Rugged Power™,
Rugged Systems™,
SCADA power™,
Security Gate Power™,
Shipboard Power™,
Shipboard UPS™,
Signal Backup™,
Solar Backup™,
Solar Power Source™,
Tactical Computers™,
Tactical Medical Office™,
Tactical Office™,
Tactical Solar Fly™,
Telecom Power Source™,
the Warfighter™,
Traffic Backup™,
Traffic Signal Backup™,
UPStart™,
Utility Backup™, and
Warfighter Power™ are trademarks of
Energy Technologies, Inc.
Airborne Power®,
Diplomatic Power®,
Expeditionary Power®,
Extreme UPS®,
Hybrid Energy Technologies®,
Industrial Power Source®,
Military
Power®,
Mil
Spec®,
Personal Solar®,
Tactical
Cables®,
Tactical Cooling®,
Tactical Computer
Workstation®,
Tactical Data
Vault®,
Tactical Field Office®,
Tactical Fuel Cells®,
Tactical Generator®,
Tactical Inverter®,
Tactical
Micro Grid®,
Tactical Power®,
Tactical
Power Plant®,
Tactical Shelter Systems®,
Tactical Solar®,
Tactical Solar
Shelter®,
Tactical UPS®,
Tactical Vehicle Power®,
Tactical Wind Turbine®
and
Ultimate Survival Gear®
are registered
trademarks of Energy Technologies, Inc.
Legal
Statements
|
